Assembly - Baby Trend TS89A Manual De Instrucciones

ASSEMBLY

REAR WHEELS
Attach the rear axle assembly and wheels as
follows:
2) • Position axle assembly over the rear leg
tubes, brake pedals facing back. At the
same time, push down applying equal
pressure to both sides until they lock into
place (Fig. 2).
NOTE : NEVER use stroller if wheels do
not lock into place.
CHILD TRAY
3) • To attach the child tray, push the angled
side of the tray onto the post at the
end of the right armrest while pressing
downward on the snap button, until
locking in place (Fig. 3a). Rotate the tray
downward until it latches onto the left
armrest into place (Fig. 3b).
NOTE : Check that the snap button
comes through and securely in place
(Fig. 3c).
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
PARENT TRAY
hot liquids or more than 3 pounds
in the parent tray. Serious burns or
Fig. 2
unstable conditions could result.
4)
MULTI-POSITION HANDLE
Fig. 3a
5)
Fig. 3b
Fig. 3c
WARNING:
Do not place
• To attach the parent tray, line up the
parent tray slots with corresponding slots
on the stroller frame and slide down until
locking into place (Fig. 4).
NOTE : Check to make sure the parent
tray is secure before using.
• To adjust the handle, press the buttons
to move the handle up or down to a
comfortable position for the user (Fig. 5).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 4
Fig. 5
6