ION TOTAL PA GLOW Guia De Inicio Rapido página 6

16. Clip LED: This LED will flash red if the signal from the inputs or media panel source is clipping. If
this happens, decrease the setting of the Mic Input Volume knob, Aux Input Volume knob, or
Master Volume knob.
17. Power LED: Indicates whether Total PA Glow is powered on or off.
18. Light Mode Button: Press this button to select how the lights on the front panel function:
•
Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light mode
button to freeze the lights on one color. This is the default mode when Total PA Glow is first
powered on.
•
Beat Sync: The lights react to the beat of the music.
•
Off: The lights turn off.
19. Power Cable Input (IEC): Insert the included power cable here to power the unit.
20. Fuse: The orientation of the fuse holder determines the current voltage setting of Total PA Glow.
The current setting is shown above the white triangle (): 110–120 V or 220–240 V. If you use
Total PA Glow in a region with a different voltage, change the voltage setting by removing the
fuse holder, inverting it, and reinserting it.
If the unit's fuse is broken, remove the fuse holder and replace the broken fuse with one with the
same rating (printed on the fuse holder). Using a fuse with an incorrect rating can damage the unit
and/or fuse.
21. Power Switch: Turns Total PA Glow on or off.
Media Panel
Media Panel Functions:
MODE Mode: Switches modes from USB, SD, FM radio (if applicable), or Bluetooth.
Play/Pause: Play/pause the USB, SD, or Bluetooth source. Press and hold Play/Pause for 2
seconds to begin the preset auto-store function (if applicable). This jumps to the lowest
station (87.5) and then travels through the bandwidth to auto-store the strongest stations as
presets.
Repeat: Repeat all of the tracks (ALL), repeat all of the tracks in the folder (FOLd), repeat the
current playing USB or SD track (OnE), or shuffle the track order (rAn).
Previous: Plays the previous USB, SD, or Bluetooth track. When listening to the FM radio (if
applicable), press the button once to skip back through the FM stations and hold the button
down to seek back through the channel presets.
Next: Plays the next USB, SD, or Bluetooth track. When listening to the FM radio (if
applicable), press the button once to tune the radio down one preset and hold the button
down to seek forward through the channel presets.
Note: In some apps, pressing the Previous (
music genre.
6
) or Next ( ) buttons may go to another playlist or