Samsung ME21K7010DG/AA Manual Del Usuario página 35

Problem Cause
There are sparks Metal containers are
during cooking. used during cooking or
thawing.
When power is The door is not properly
connected, the oven closed.
immediately starts to
work.
There is electricity The power source or
coming from the power outlet is not
oven. properly grounded.
There is water Water or steam may
dripping. be generated by the
cooking or defrosting
process, depending on
the food. This is not an
oven malfunction.
There is steam coming Water or steam may
through a crack in the be generated by the
door. cooking or defrosting
process, depending on
the food. This is not an
oven malfunction.
There is water left in Water or steam may
the oven. be generated by the
cooking or defrosting
process, depending on
the food. This is not an
oven malfunction.
Action
Do not use metal containers.
Close the door and check
again.
Make sure the power
source and power outlet are
properly grounded.
Let the oven cool and then
wipe with a dry dish towel.
Let the oven cool and then
wipe with a dry dish towel.
Let the oven cool and then
wipe with a dry dish towel.
Problem Cause
The brightness inside Changes in brightness
the oven varies. reflect changes in power
output. Power output
changes depending on
the functions in use.
Cooking is finished, To ventilate the oven,
but the cooling fan is the cooling fan continues
still running. to run for about 3
minutes after cooking is
complete.
Pressing the START This happens when the
button operates the oven is not operating.
oven.
Turntable
While turning, the There is no roller ring,
turntable comes out or the roller ring is not
of place or stops properly in place.
turning.
The turn table drags The roller ring is not
while turning. properly in place, there
is too much food, or the
container is too large
and touches the inside of
the microwave.
The turn table rattles Food residue is stuck to
while turning and is the bottom of the oven.
noisy.
Action
Power output changes
during cooking are not
malfunctions.
This is not an oven
malfunction.
The microwave oven is
designed to start operating
when you press the
START button if it was not
operating.
Install the roller ring
properly and then try again.
Install the roller ring
properly. Adjust the
amount of food. Do not use
containers that are too large.
Remove any food residue
stuck to the bottom of the
oven.
English 35