Jensen POWER 400.2 Manual De Instalación Y Operación página 7

Ground Terminal (GND)
Make the ground lead as short as possible, leaving enough length to complete
the installation and to allow for any service that may be needed at a later date.
To ensure a good ground, scrape away any paint or undercoating to expose
bare metal. Use a "ring" terminal of the proper gauge and an "outside star
washer" (between the chassis and ring terminal) when making your ground
connection. Although you've scraped away the paint to expose bare metal, the
outside star washer will help to "bite into" the chassis for a tight, secure
ground.
Drill hole in chassis sheet metal.
Replacement Fuse Requirements (FUSE)
Model Quantity Amps
400.2 1 25
760.4 2 20
900.1 2 30
POWER INPUT
GND REM +12V
Type
ATO
ATO
ATO
5
POWER Amplifiers