Using; Lighting - PRECITEC POLYTEC MSA23.003 Manual De Instrucciones

5.

USING

We kindly request you to check the buttons on control panel and try to learn the device.
Button 1 Power switch on/off
Button 2 Left lighting on/off
Button 3 Left vacuum power on/off
Button 4 Power on/off button for polishing motor
Button 5 Speed Stage selector for MSA23.003 : (I) 1500 (II) 3000
Potentiometer to adjust number of revolutions (only for MSA23.004)
Button 6 Right vacuum power on/off
Button 7 Right lighting on/off
Button 8 Emergency stop button
The power switch empowers on and off the whole device. This button emits light when device is
energized. If switched off, no operation can be handled at the device. While the device is operating,
if the power button is switched off directly, whole device stops operating ; but the device goes on
operating again after power button is switched back on. So for your safety, we recommend to switch
off all buttons when you want to power off the whole device.
5.1
Lighting system is consisted of 4x 9 high-power LED lights and has the capacity of 1600 Lumens that
perfectly lightens the work area of polishing device and prevents glows. With its comfortable white
light, it is possible to work without straining the eyes.
You can turn on the light by pressing the buttons no. 2 and 7
(dust and dirt and can be easily and reliably cleaned).
It is possible to change the light cover when it is damaged or seriously scratched. You can procure
this protective glass produced by acrylic as spare part from your dealer.
Polishing machines POLYTEC by PRECITEC® / MSA23.003 - MSA23.004 / User manual

LIGHTING

Use a slightly moisturized and dust-free swab for cleaning. Do not
use aggressive solutions for cleaning in order to prevent
protective glass from potential damages.
22