• Keep others away when making
carburetor
adjustments.
• Use only r ecommended
Poulan
PRO ac-
cessories
and r eplacement
parts.
• Have all m aintenance
and s ervice not ex-
plained
inthis manual
performed
by an au-
thorized
service
dealer.
FUEL
SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container
approved
for fuel.
• Do not smoke
or allow smoking near fuel or
the unit.
• Avoid spilling
fuel or oil.
Wipe
up all fuel
spills.
• Move at least 10 feet (3 meters) away from
fueling site before starting
engine.
• Stop engine
and allow to cool before re-
moving fuel cap.
• Always
store
gasoline
in a container
ap-
proved for flammable
liquids.
TRANSPORTING
AND
STORAGE
• Allow engh_e to cool before storing or trans-
porting in vehicle.
• Emptythe
fueltank
before storing or trans-
porting the unit. Use up fuel left in the carbu-
retor by starting the engine and letting it run
until it stops.
• Store unit and fuel in area where fuel vapors
cannot reach sparks or open flames from wa-
ter heaters, electric motors or switches,
fur-
naces, etc.
• Store unit so line limiter blade cannot acci-
dentally
cause injury. The unit can be hung
by the shaft.
• Store unit out of reach of children.
SAFETY
NOTICE:
Exposure
to vibrations
through
prolonged
use of gasoline
powered
hand tools could cause blood vessel or nerve
damage
in the fingers,
hands, and joints of
people
prone to circulation
disorders
or ab-
normal
sweHh_gs.
Prolonged
use
in cold
weather has been linked to blood vessel dam-
age in otherwise
healthy people.
Ifsymptoms
occur
such
as
numbness,
pain,
loss
of
strength,
change
in skin color or texture,
or
loss of feeling
in the fingers,
hands, or joints,
discontinue
the use of this tool and seek med-
ical attention.
An anti-vibration
system does
not guarantee
the avoidance
of these
prob-
lems.
Users
who operate
power tools on a
conflnual
and
regular
basis
must
monitor
closely their physical
condition and the condi-
tion of this toot.
SPECIAL
NOTICE:
This unit is equipped
with a temperature
limiting
muffler and spark
arresting
screen
which
meets
the require-
ments of California
Codes 4442 and 4443. All
U.S. forest land and the states of California,
Idaho, Maine, Minnesota,
New Jersey,
Ore-
gon,
and Washington
require
by law that
many
internal
combustion
engines
be
equipped
with a spark arresting
screen.
Ifyou
operate in a locale where such regulations
ex-
ist, you are legally responsible
for maintaining
the operating condition
of these parts. Failure
to do so is a violation
of the law.
For normal
homeowner
use, the muffler and spark arrest-
ing screen will not require any service.
After
50 hours of use. we recommend
that your
muffler be serviced
or replaced
by an autho-
rized service
dealer.
LINE
TRIMMER
SAFETY
_&WARNING:
inspect
the area to be
trimmed
before each use. Remove
objects
(rocks, broken
glass, nails, wire, etc.) which
can be thrown by or become entangled
in line.
Hard objects
can damage
the trimmer
head
and be thrown
causing
serious
injury=
• Use only for trimming, scalping,
mowing and
sweeping.
Do not use for edging, pruning or
hedge trimming.
• Cut from your right to your left.
Cutting on
left side of the shield will throw debris away
from the operator.
ADDITIONAL
SAFETY
RULES
FOR
OPTIONAL
ATTACHMENTS
£A
m_WARNING:
Per each
optional
at-
tachment
used, read entire instruction
manu-
al before use and follow all warnings
and in-
structions
in manual and on attachment.
_WARNING:
Ensure
handlebar
is
installed when using edger or brushcutter
at-
tachments.
Attach handlebar
above arrow on
safety label on the upper shaft (engine end of
unit), if your edger or brushcutter
attachment
does not include a handlebar, a handlebar
ac-
cessory
kit (#530071451)
is available
from
your authorized
service dealer.
Handlebar
EDGER
SAFETY
_,WARNING:
inspect
the area to be
edged
before
each
use.
Remove
objects
(rocks, broken
glass, nails, wire, etc.) which
can
be thrown
by the
blade
or can
wrap
around
the shaft.
• Blade rotates momentarily
after the trigger
is released.
The blade
can seriously
cut
you or others.
• Allow blade to stop before removing
it from
the cut.
Blade rotates
Allow blade to stop
before removing it
after the
from the cut,
trigger is
release_
• Throw away blades that are bent, warped.
cracked,
broken or damaged
in any other
way.
Replace
parts
that
are
cracked.
chipped,
or damaged before using the unit.
3