HOW TO USE THE CHARGER
The special purpose charger JC610M has the LEDs (green, red) which indicate the status of the charger
and Battery.
Green LED
1.
○ ON
2.
● OFF
3.
○ ON
4.
Blinking
5.
○ ON
6.
Blinking
The following cases are considered to be the troubles. Replace the charger and Battery with new ones.
● The green LED is not turned on if the power plug of the charger is plugged into a 100-240 V AC (for
household use) plug socket. (With the Battery unset)
※ Check with another electric appliance to see whether electricity is available at the plug socket.
● Neither green nor red LED is turned on or blinks if the Battery is set in the Charger.
● The green LED is not turned on 150 minutes after the red one has been turned on.
● The red LED is not turned on if the Battery is set in the charger.
Red LED
● OFF
Power-on
○ ON
Charging
● OFF
Charge Completed
High temparature
Blinking
○ ON
Battery alarm
Battery high
○ ON
temparature alarm
Troubles of Charger and Battery
Status
The charger has been plugged in. (Power-on status:
Battery unset)
The Battery is being charged.
The Battery has been completed charged.
The Battery is hot. (Remove it from the Charger and
alarm
cool it down for a while before charging.)
The Battery is defective. (Replace it with a new one)
The Battery is defective and hot. (Replace it with a
new one.)
14
Description