Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Nose adapter
1
► 1. Nose adapter
The nose adapter prevents the surface of workpiece
from being scratched or damaged. Place the nose
adapter correctly.
Store the nose adapter in place when not in use. The
place for storage is on the bottom sides of the tool.
► 1. Nose adapter
Short nail adapter
► 1. Short nail adapter
1
1
► 1. Short nail adapter 2. Bolt
Attach the short nail adapter to prevent the short nails
from being jammed when you use nails shorter than 25
mm (1 ").
Insert the short nail adapter into the slit in the rear of the
magazine. Then fix the adapter by tightening the bolt.
OPERATION
WARNING:
Do not touch around the exhaust vent. The
•
surface will be very hot during or after an oper-
ation. Touching around the exhaust vent may
cause burns or injuries.
CAUTION:
•
Make sure all safety systems are in working
order before operation.
1.
To drive a nail, place the contact element against
the workpiece.
The fan motor is activated, fuel gas is injected into com-
bustion chamber and mixed with air by the fan.
9 ENGLISH
1
2
Publicidad
Tabla de contenido
