Cleaning And Maintenance - Domo DO7087S Manual De Instrucciones

www.domo-elektro.be
will light up.
5. The water in the water tank will start heating up
and after a couple of minutes the temperature
indicator will go out. This indicates that the
soleplate has reached the set temperature. When
the steam indication light colours blue, you may
start ironing.
Attention: make sure that the temperature dial is
positioned into the steam area (indicated by
Caution:
• Never touch the hot soleplate!
• Never aim the steam at people!
6. After ironing, press and hold the on/off button. The appliance will shut off
and all the light indicators will go out. Unplug the appliance. Place the iron on
the thermal insulation pads of the generator and let the appliance cool down
completely.
Ironing tips
• Always check first if there is a label on the garment with instructions for ironing.
If this is the case, then always follow these instructions.
• The iron heats up faster than it cools down. Therefore, always iron the garments
that require the lowest temperature first, like synthetic fabrics.
• If a fabric contains several types of fibres, always choose the lowest temperature
to iron the combination of these fibres.
• Silk and other shiny fabrics should be ironed inside-out.
• Velvet and other fabrics that easily become shiny should be ironing with slight
pressure, in one direction. Always keep the iron moving.
• Fabrics that are a 100% wool can be ironed with steam. Set the temperature to the
maximum and use a dry cloth to place on the fabric.
• Never iron over zippers or other metal objects in a garment. This can damage the
soleplate. Always iron around such objects.
Caution: if you iron woollen fabrics, the fabric may become shiny. That is why you
should turn the garment inside-out for ironing.

CLEANING AND MAINTENANCE

1. Unplug the appliance and let it cool down before cleaning it.
2. Wipe residues from the soleplate with a damp cloth or with a non-abrasive
(liquid) cleaner.
Caution: Do not use any chemical, steel, wooden or abrasive cleaners to
scrape the soleplate.
3. Clean the upper part of the iron with a soft, damp cloth.
4. Wipe the water drops on the steam generator and the thermal insulation pads with
a dry cloth.
).
49
DO7087S