Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
16
The following in particular is prohi-
bited:
Vacuuming:
„
– People, animals, plants or items of
clothing on the body
High risk of injury!
– Hot ash, burning cigarettes, matches
and highly flammable substances
Risk of fire!
– Water and other liquids
Risk of short circuit!
– Toner (for laser printers, copying ma-
chines, etc.)
Risk of fire and explosion!
Use
„
– in the vicinity of explosive or highly
flammable substances
Risk of fire and explosion!
– outdoors
Risk of damage due to rain and dirt!
– of non-original accessories
Impairment of appliance safety!
Carrying out repairs yourself
„
Risk of injury and loss of entitlement
to free replacement!
Concerning disposal
After its service life, dispose of the appli-
„
ance in an environmentally friendly manner,
as described,
>"Environmental protection and disposal"
on page 13.
EN
Preparatory work
Getting to know the appliance
Fig.
:
Dust bin cover release;
1
1
hose release;
dust bin cover;
3
4
dle;
dust bin release;
6
parking bracket;
8
nection cord;
ON/OFF button;
11
with accessory bracket;
telescopic tube;
15
16
scopic tube release catch;
carpet nozzle;
19
20
Accessories (optional):
parquet nozzle;
A
Unpacking and assembling
Check that the unpackaged contents are com-
1
plete. If you notice any transport damage or if an-
ything is missing, contact your dealer immediate-
ly.
Connect suction hose and appliance (Fig.
2
Connect the suction hose with the telescopic tube
3
and adjust the length of the telescopic tube (Fig.
Connect telescopic tube and switchable floor noz-
4
zle (Fig.
).
Ensure that the bypass vent (Fig.
4
5
is completely closed.
Using the accessories
CAUTION!
For hard floors, only use the switchable floor
nozzle (Fig.
/
) with the brush (Fig.
1
18
tended, as the hard floor may otherwise become
damaged.
CAUTION!
If using the turbo nozzle (Fig.
that the surface can withstand the rotating brush
without becoming damaged.
NOTE:
The carpet nozzle (Fig.
oped specially for carpets and cleans deep down.
As a result of its design it may adhere firmly to the
carpet. This adhesion can be reduced using the
bypass vent (Fig.
1
Do not use the carpet nozzle for hard floors as
the hard floors will otherwise become damaged.
dust bin;
2
dust bin han-
5
cord rewind button;
7
exhaust filter cover;
9
10
suction hose
12
handle;
bypass vent;
13,
14
suction hose port;
tele-
17
switchable floor nozzle;
18
3-in-1 combi nozzle
mini turbo nozzle
B
) ex-
10
1
/
), make sure
B
/
) is a nozzle devel-
1
19
/
).
14
con-
).
2
).
3
/
)
1
14
Publicidad
Tabla de contenido
