5 INSTALLATION
5.1
10
Installation
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
–
When the Top Case is mounted, the handling characteristics, as well as the cornering and braking
characteristics, may change due to greater crosswind sensitivity, especially when it is fully laden.
Beware of strong winds. Due to the changed handling characteristics, approach the permitted maxi-
mum speed of 150 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 5 kg.
–
Distribute the load evenly and secure it against slipping.
Info
Do not use a pressure cleaner to clean the Top Case, as the high pressure may damage the seal. Use a
neutral detergent (water with mild soap).
500408-01
500409-01
500410-01
Condition
The luggage rack 60612910044 (not included) is required to
mount the Top Case.
–
bm
Springs
for the tumblers differ by their lower spring rate
bo
from spring
for the engaging plate. You can recognize
bn
engaging plate
by the fact that there is no number imprin-
ted on it.
Info
The kit contains many small parts. It is recommended
that you perform the assembly while seated at a table.
–
bm
Insert springs
(included) into chambers
–
bl
Insert tumblers
(included) with the number 1 into cham-
A
C
E
bers
,
, and
.
A
C
E
,
, and
.