KTM 63512929544 Manual Del Usuario página 36

6 CHANGING THE LOCKING CYLINDER
16
–
Move the key into top position
–
Push engaging plate
–
Remove the locking cylinder.
Info
It is essential that the key remains in the locking cylin-
der.
500432-01
Installing the locking cylinder
–
Mount O-ring
–
Position and insert the locking cylinder as shown in the
figure (the catch must point downwards).
Engaging plate
500414-01
–
Mount plug
Info
The catch of the plug must be seated in front of the
first gear teeth (see arrow).
500433-01
–
Move the key 90° to the right
–
Mount the cover with the springs.
Info
Make sure that the springs are correctly seated on
the corresponding catches.
–
Mount and tighten screws
–
Position rocker arm
500434-01
–
Mount and tighten pin
–
Move the key into top position
–
Mount the securing unit.
Info
The spring must be seated on the corresponding
recess (see arrow).
500435-01
J
.
bn
into the locking cylinder.
bp
(included).
bn
engages.
dk
.
K
.
ct
.
cs
with the spring facing upward.
cr
.
J
.