Programming & Operation Setting The Clock - Honeywell RTH2510 Manual Del Usuario

Operating Manual
Set the clock
Press the Set button. Set Time will appear on the screen and the
time display will flash.
Press the Up or Down button to set the time.
Press the Set button again. Set Day will flash on the screen.
Press the Up or Down button to select the day of the week.
Press the Run button to save the changes & exit. (The changes
are also saved if you do not press any button for 60 seconds.)
NOTE: The clock has lost its settings when the time display flashes. If the thermostat is
following the schedule, it will use the temperature settings programmed for the Wake
period for Monday until you readjust the clock.
6