Bosch GSA 1100 E Professional Manual Original página 12

12 | English
(11) Clamping plate
(12) Base plate screw
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Stroke rate control
Rated power input
No-load stroke rate n
0
Tool holder
Stroke
Max. cutting depth
– in wood
– in steel (unalloyed)
– Pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade S 3456 XF:
2 2
a = 18.5 m/s , K = 1.5 m/s ,
h,B
Cutting wooden beams with saw blade S 3456 XF:
2 2
a = 19.5 m/s , K = 1.5 m/s .
h,WB
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 6F1 | (30.03.2021)
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
GSA 1100 E
3 601 F4C 8..
Pull the plug out of the socket before carrying out any
u
work on the power tool.
●
W 1100
Inserting/changing the saw blade
-1
min 0−2700
When fitting or changing the saw blade, wear protect-
u
SDS
ive gloves. Blades are sharp and can become hot when
mm 28 used for prolonged periods of time.
While replacing the saw blade, ensure that the saw
u
blade receptacle is free of material residue, e.g. wood
mm 230
or metal chips.
mm 20
Selecting the saw blade
mm 150
You will find an overview of recommended saw blades at the
kg 3.6
end of these operating instructions. Only use saw blades
with a 1/2" universal shank. The saw blade should not be
longer than required for the intended cut.
/Ⅱ
Inserting the saw blade (see figure A)
Press the SDS lever (4) forward and guide the saw blade (1)
behind the clamping plate (11) into the saw blade
receptacle (3). Release the SDS lever (4).
Check that it is seated securely by pulling the saw
u
blade. A loose saw blade can fall out and lead to injuries.
For particular jobs, the saw blade (1) can also be flipped
180° (teeth point upwards) and refitted.
Removing the saw blade
Let the saw blade cool down before removing it. There
u
is a risk of injury when touching the hot saw blade.
Press the SDS lever (4) forward and pull out the saw
blade (1). Release the SDS lever (4).
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one's
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
Bosch Power Tools