5.1
The device must be cleaned after each use. Do not use aggressive clean-
Cleaning,
ing agents or strong brushes so that the surface is not damaged. Never im-
care and
merse the device or parts of it in water and never rinse them under running
storage
water! To clean properly proceed as follows:
•
•
•
•
5.2
1 cartridge is included in the delivery scope with a lifetime of up to 200,000
Replacing
light pulses. In case of normal use in accordance with these instructions
the cartridge
one cartridge is enough for an individual user for several years of use. If
spots are visible on the cartridge, no or hardly any light emissions take
place or the lens is broken, the cartridge should be replaced. Switch the
device off and take the power supply plug out of the socket. Pull out the old
cartridge and insert the new one.
Make sure that the device has been disconnected from the power grid.
Clean the housing with a clean, lint-free and dry cloth.
Moisten a soft, lint-free cloth with a few drops of water and clean all
sensors and the light area
Store the device in a dry and dust-free location, ideally in the original
packaging according to the storage conditions in chapter 5.5 "Speci-
fications".
5 Miscellaneous
thoroughly.
5
GB
47