Connecting A Portable Cassette/Md/Mp3 Player Or Other Equipment; Setting The Beep Tone; Setting The Contrast Control - Aiwa CDC-MP3 Manual De Instrucciones

CONNECTING A
PORTABLE CASSETTE/
MD/MP3 PLAYER OR
OTHER EQUIPMENT
This unit is equipped with a line-level input (AUX
IN) jack, enabling high sound quality.
1
Connect a portable cassette/MD/MP3
player, etc. via the AUX IN jack (3.5-mm
dia.) of the unit.
2
Press FUNCTION repeatedly to select
AUX IN mode.
The "AUX IN" indication appears.
3
Start playback from the connected
equipment.
• For further information on the portable cassette/
MD/MP3 player, etc., refer to the operating
instructions for that equipment.
17
ENGLISH

SETTING THE BEEP TONE

The unit is preset at the factory to beep each time
you press any button on the front panel except
OPEN (no beep with the Jog Dial). You can mute
this beeping by following the procedure below.
1
With the unit off, press and hold SELECT
for more than 2 seconds.
2
Rotate the Jog Dial to select "BEEP
ON" or "BEEP OFF".
3
Press SELECT.
The unit turns off.
SETTING THE CONTRAST
CONTROL
You can change the contrast of the display.
1
With the unit on, press and hold
FUNCTION for more than 2 seconds.
The current contrast indication appears.
2
Rotate the Jog Dial to select the
contrast.
Rotate clockwise for higher contrast.
Rotate counterclockwise for lower contrast.