Maintenance; Air Index; Emission Control System Warranty; Warranty Coverage - Honda GX100 Manual Del Propietário

Maintenance

As the power equipment engine owner, you are responsible for
completing all required maintenance listed in your owner's manual.
Honda recommends that you retain all receipts covering maintenance on
your power equipment engine, but Honda cannot deny warranty
coverage solely for the lack of receipts or for your failure to ensure that all
scheduled maintenance has been completed.
Follow the "MAINTENANCE SCHEDULE" on page 6.
Remember that this schedule is based on the assumption that your
Honda engine product will be used for its designed purpose. Sustained
high-load or high-temperature operation, or use in dusty conditions, will
require more frequent service.

Air Index

(Models certified for sale in California)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the requirements of
the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower the
Air Index, the less pollution.
The durability description is intended to provide you with information
relating to the engine's emission durability period. The descriptive term
indicates the useful life period for the engine's emission control system.
See your "EMISSION CONTROL SYSTEM WARRANTY" (see page 14) for
additional information.
Descriptive Term Applicable to Emission Durability Period
Moderate 50 hours (0–80 cc, inclusive)
125 hours (greater than 80 cc)
Intermediate 125 hours (0–80 cc, inclusive)
250 hours (greater than 80 cc)
Extended 300 hours (0–80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)

EMISSION CONTROL SYSTEM WARRANTY

Your Honda Power Equipment engine is designed, built, and equipped to
meet the U.S. EPA, Environment Canada, and California Air Resources
Board (models certified for sale in California only) emission standard for
spark ignited engines. American Honda Motor provides the emission
warranty coverage for engines in the United States and its territories.
Honda Canada provides the emission warranty for engines in the 13
provinces and territories of Canada.
14

Warranty Coverage

Honda Power Equipment engines certified to the U.S. EPA, Environment
Canada, and State of California (models certified for sale in California
only) emission regulations are covered by this warranty to be free from
defects in materials and workmanship that may keep it from meeting the
applicable U.S. EPA , CARB and Canadian emissions requirements for a
minimum of 2 years or the length of the Honda Power Equipment
Distributor's Limited Warranty, whichever is longer, from the original date
of delivery to the retail purchaser. This warranty is transferable to each
subsequent purchaser for the duration of the warranty period. Warranty
repairs will be made without charge for diagnosis, parts, and labor.
Information about how to make a warranty claim, as well as a description
of how a claim can be made and/or how service can be provided, can be
obtained by contacting an authorized Honda Power Equipment dealer or
by contacting the following:
American Honda
Email: powerequipmentemissions@ahm.honda.com
Telephone: (888) 888-3139
Honda Canada
Telephone: (888) 946-6329
The covered components include all components whose failure would
increase an engine's emissions of any regulated pollutant or evaporative
emissions. A list of specific components can be found in the separately
included emissions warranty statement.
Specific warranty terms, coverage, limitations, and manner of seeking
warranty service are also set forth in the separately included emissions
warranty statement. In addition, the emission warranty statement can
also be found on the Honda Power equipment website or at the
following link:
http://powerequipment.honda.com/support/warranty

Specifications

KRE-type (basic type)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity* 1
Cooling system
Ignition system
PTO shaft rotation
*
1: When mount for rammer is angle 15°.
*
The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model
and measured in accordance with SAE J1349 at 3,600 min
Power) and at 3,600 min
engines may vary from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed
of the engine in application, environmental conditions, maintenance,
and other variables.
ENGLISH
266×306×290 mm
(10.5×12.1×11.4 in)
10.9 kg (24.0 lbs)
4-stroke, overhead camshaft,
single cylinder
3
98.5 cm (6.01 cu-in)
[56.0×40.0 mm (2.2×1.6 in)]
2.1 kW (2.9 PS, 2.8 bhp) at
-1
3,600 min (rpm)
5.7 N·m (0.58 kgf·m, 4.2 lbf·ft) at
-1
3,600 min (rpm)
0.28 L (9 oz, 0.25 lmp qt)
Forced air
Transistor magneto
Counterclockwise
-1
(rpm) (Max. Net Torque). Mass production
-1
(rpm) (Net