Braun 3 Serie Manual Del Usuario página 7

Description
1 Foil & Cutter cassette
2 Long hair trimmer
3 Precision setting switch («lock»)
4 On/off switch
5 Charging lights (green)
6 Low-charge light (red)
7 Replacement light for shaving parts
8 Shaver power socket
9 Special cord set
10 Foil protection cap (model 360 only)
11 Case (model 370 only)
Charging
The best environmental temperature for charging is between 60 °F to 95 °F /
15 °C to 35 °C. Do not expose the shaver to temperatures higher than
122 °F / 50 °C for extended periods of time.
• Using the special cord set (9), connect the shaver to an electrical outlet with
the motor switched off. When charging for the first time, leave the shaver to
charge continuously for 4 hours.
• Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
• A full charge provides up to 45 minutes of cordless shaving time depending
on your beard growth. However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by
connecting the shaver to an electrical outlet via the special cord set.
• 5-minute quick charge is sufficient for a shave.
Charging lights
The green charging lights (5) show the charge status of the batteries. The
green charging light blinks when the shaver is being charged or switched on.
When the battery is fully charged, all green charging lights shine permanently,
provided the shaver is switched on or connected to an electrical outlet.
Low-charge light
The red low charge segment flashes when the battery is running low. You
should be able to finish your shave.
8