Electrical Connection - HAEGER HB-10S.022A Instrucciones De Uso

Electrical connection

1. Connect the device to a duly installed 220-240V~ 50/60Hz protective
contact socket.
2. Before inserting the plug into the socket, make sure that the mains voltage
to be used matches that of the device. You can find this information on the
nameplate.
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Insert the blender shaft onto the motor unit until you hear the "click"
that tells you it has locked.
2. To avoid splashing, first immerse the blade guard completely into the
ingredients, plug in the appliance and then press the switch (I) to work
at the set speed (control knob F) or turbo switch (II).
3. Move the appliance slowly up and down and in circles to blend the
ingredient.
4. Unplug then remove the blender shaft after use.
5. You can use the hand blender in the measuring beaker and just as well
in any other vessel.
Warning:
Maximum operation time is 1 minute. Allow to cool for 4 minutes
before using the blender again.
Cleaning
Risk of electric shock!
Before you clean the hand blender, unplug the appliance from the power
socket. Under no circumstances may the motor unit be cleaned by immersing it
in water or holding it under running water.
Clean the motor unit, the hand blender, with a moist cloth.
•
After processing very salty food, you should rinse the blades right away.
•
Ensure that water cannot permeate through the openings of the hand
•
mixer. For stubborn soiling use a mild detergent on the cloth.
Clean the rest of the attachment components under running water and dry
•
them off well with a dish towel.
Instructions for use
English
3