Uniteck UNIBAT AGM Manual Del Usuario página 21

Batería plomo carbono
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
WIRING
Distance inter-batteries
When they are functionning batteries produce heat. In order to reduce those effects on performances,
it is recommended not to stick batteries together. Make sure you have at least from 0.5 to 2cm between
each battery.
Tightening
Tighten terminals screws according to the tightening torque mentioned below:
23.5~25.5 Nm or 240-260 Kgf-cm
A wrong tightening can interfere with your charger or your charging system. It means that it can create
irregular performances and/or damage your battery. Once all bolts are well tightened, put the isolator
cap to protect against all accidental contacts.
www.uniteck.fr
21/46

Publicidad

Tabla de contenido
loading

Tabla de contenido