Enclosure Configuration; Door Locks; Cable Access & Management; Reversing The Enclosure - Tripp-Lite SmartRack SRW10US El Manual Del Propietario

5. Enclosure Configuration

5.1 Door Locks

All enclosure doors (including front and back doors, as well as both side panels) have locks that are
accessible by included keys.
5.2 Cable Access and Management
The back door of the enclosure has a square opening for cable access and management. An additonal
opening can be found on top of the main cabinet. Each opening can also be closed by screwing in the
removeable cable access panels.

5.3 Reversing the Enclosure

In order to accommodate various rack configurations, the enclosure can be reversed. To do so, simply turn the enclosure over so that the doors open in the
opposite direction.

5.4 Mounting Rails

The enclosure comes with mounting rails that have square holes for mounting rack equipment. To install
equipment, use the included cage nuts and other hardware. (See page 7 for installation of cage nuts.)
Warning: Be sure to have the enclosure securely mounted to the wall, or in its final position on the
floor before mounting any equipment inside. Also be sure to have all the right adjustments on your
rails before mounting equipment. (See below for Adjusting Mounting Rail Depth.)
5