Publicidad
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTALLATION
Your appliance shall be used as portable appliance only (thanks to respect all the safety warnings given below)
Put the heater on a flat, dry and clean surface.
Install the standing feet with wheels provided with product.
Warning: Always use your appliance with rollers fixed.
INSTRUCTIONS FOR USE
1. Plug the appliance to socket. Please verify the rated current of the power socket whether it fits the requirements
and equipped with a safety grounding device; otherwise, replace the socket.
2. Turn the thermostat knob clockwise to the MAX position
3. To start the heater, turn the switch to set the power select Low power ( I ), Medium power ( II ), High power ( III ).
Note: When the expected temperature reaches, turn the thermostat knob back slowly until you hear a click (Now the
expected temperature is reached. The heater will automatically switch on and off to maintain the setting temperature.)
If you want a higher or lower temperature, turn the thermostat control knob either clockwise or anticlockwise.
4. To turn off the heater, set the power switch to the "0" position and remove plug from the mains socket.
Information requirements for electric local space heaters
MODEL IDENTIFIER(S): RD1500A
Item
Symbol
Heat output
Nominal heat output
P nom
Minimum heat output
P min
(indicative)
Maximum continuous
P max,c
heat output
Auxiliary electricity
consumption
At nominal heat
el max
output
At minimum heat
el min
output
In standby mode
el SB
18
Value
Unit
Item
Type of heat input, for electric storage local space heaters only
(select one)
1.5
KW
manual heat charge control, with integrated thermostat
0.6
KW
manual heat charge control with room and/or outdoor
temperature feedback
1.5
KW
electronic heat charge control with room and/or outdoor
temperature feedback
fan assisted heat output
1.462
KW
Type of heat output/room temperature control (select one)
0.564
KW
single stage heat output and no room temperature control No
N/A
KW
Two or more manual stages, no room temperature control No
with mechanic thermostat room temperature control
Unit
No
No
No
No
Yes
Publicidad
