Philips GC6700 serie Manual Del Usuario página 7

Note: The Calc-Clean container has been designed to collect scale particles and hot water during
the Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire
process.
5 During the Calc-Clean process, you hear short beeps and a pumping sound (Fig. 16).
6 Wait approximately 2 minutes for the appliance to complete the process (Fig. 17). When the
Calc-Clean process is completed, the iron stops beeping and the CALC-CLEAN light stops flashing.
7 Wipe the iron with a piece of cloth and put it back on the base station (Fig. 18).
Caution: The iron is hot.
8 As the Calc-Clean container becomes hot during the Calc-Clean process, wait about 5 minutes
before you touch it. Then carry the Calc-Clean container to the sink, empty it and store it for future
use (Fig. 19).
9 If necessary, you can repeat steps 1 to 8. Make sure that you empty the Calc-Clean container
before you start the Calc-Clean process.
Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has
accumulated inside the iron. This is normal.
For more information on how to carry out the Calc-Clean process, refer to the videos in this link:
http://www.philips.com/descaling-iron.
Cleaning the soleplate
To properly maintain your appliance, clean it regularly.
1 Clean the appliance with a moist cloth.
2 To easily and effectively remove stains, let the soleplate heat up and move the iron over a moist
cloth (Fig. 20).
Tip: Clean the soleplate regularly to ensure smooth gliding.
Storage
1 Switch off the appliance and unplug it.
2 Pour the water out of the water tank into the sink (Fig. 21).
3 Fold the mains cord and water supply hose together. Push them into the storage compartment
(Fig. 22).
4 For GC6730 series only: push the carry lock release button to lock the iron onto the iron platform
(Fig. 23). You can carry the appliance by the handle of the iron when it is locked onto the iron
platform (Fig. 24).
English
9