3. Installing the digital camera
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery Confirmation
It is difficult to change the batteries when using the Case. Make sure that you have sufficient remaining
battery capacity before use.
2. Check the remaining number of pictures
Check that the image storage medium has enough room for the number of pictures you want to take.
3. Remove the strap and lens cap from the camera.
If the digital camera is loaded without removing the strap and lens cap, the Case cannot be sealed
properly and may leak.
4. Attach the zoom gear (optional) and the antireflective ring (optional).
Example of 14-42mm lens
Antireflective ring
For details, refer to the instruction manual of the zoom gear and the antireflective ring.
5. Attach the electric view finder (EVF) to the digital camera.
CAUTION:
• It is possible to shoot pictures without EVF.
• You cannot use the optical view finder (OVF).
• Use EVF without acquiring angle. It may be broken.
Antireflective ring
En
EN 10