Electronic Program Guide (Epg); Software Update; Troubleshooting And Tips - Grandin LD50V274 Manual De Instrucciones

SUBTITLE : Press the
type selected. By using this functionality, you can
check the program guide database depending on the
type selected. Information available in the program
guide will be searched and the results corresponding
to your criteria will be listed.
INFO: Displays detailed information on the selected
program.
Digital buttons (Skip): Go straight to your favourite
channel by using digital buttons.
OK : After selecting a program, if you press the OK
button, you access the following functions : View
channel, Store, and / or Reserve the selected
program.
Text (Search): Displays the EPG search menu.
(Search guide).
(Info) : Displays information related to on-
goingprograms.
(RECORDING): The television starts to record
the selected program. You can press again to stop
recording.
More info on the events
P+P-:
IMPORTANT : Connect your USB device only when your
television is turned off. Then turn on the TV set in order to
enable the record function.
Note: During recording,it is not possible to change the
channel or Source.
Note: It is impossible to record two channels at the same time.

Software update

Your television can, through the antenna or cable, search
and provide updates.
Software update search via the user
interface
Simply go through the main menu. Choose Settings
and select other settings menu. In the Other
settingsmenu, select Software update and press
the OK button to open the Update options menu.
3 Search and update mode
When the TV set receives signal from the antenna. If
the Automatic search option in the Update options
menu is active, the television automatically turns on
at 3:00 a.m. and launches the search for broadcasting
channels in order to update the new software. If new
software is found and downloaded successfully,
the television begins to work with the new software
version when next it is turned on.
Note: If the television does not come on after the update,
disconnect it for two minutes, then connect it again.
button to see menu of the
English - 73 -

Troubleshooting and tips

The TV is not coming on
Check to ensure that the electricity plug is safely
connected to the wall socket or that the batteries of
the remote control are functional.
Poor picture quality
• Check if your antenna is properly connected. A poor
signal level can negatively affect image quality.
• If you carried out manual settings, verify that you
entered the right channel frequency.
• Image quality may be affected negatively when two
devices are connected to the television set at the
same time. If such is the case, disconnect one of
the devices.
No image
• No image indicates that your TV is not receiving a
signal. Have you selected the correct buttons on the
remote control? Try once more. Also make sure that
you have selected the right input source.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are not sure , please consult your supplier.
No sound
• Has the mute button been pressed? If that is the
case, press the " " button, or increase the volume.
• Only one speaker is producing sound. Is the balance
well placed in the middle? Consult the Sound menu.
The remote control is not working
• The batteries may be down. Replace the batteries.
Input sources cannot be selected.
• If you cannot select an input source, it is possible
that no device is connected.
• Check the AV cables and connections if you have
tried to connect a device.