Publicidad
Installation Instructions/Instrucciones de Instalación
Warnings:
-Do not install the fixture facing a mirror-like surfaces or other electronic systems
operated by an infra-red sensor
-Space for installation so that the user hands should not interfere with the sensor
detection area while operating a nearby faucet or other objects
-The control box must be accessible after installation
<1 3/4"
45
LACAVA
1. Install faucet body (1) into mounting hole and install
washer and lock nut from underneath the mounting
surface (2). Tighten the nut (3) by hand until snug, and
then 1/2 turn using a wranch.
Avoid damaging mounting surface by overtightening.
Attach the supply water line (4).
2. Remove the 4 phillips screws holding the cover on
the control box and remove the cover (1).
3. Unplug the battery box, uncrew the top, and install
four AA batteries (2).
4. Close the battery box (3), plug it in and re-install in
the control box cover.
4
Publicidad
