Snapper 020229 Manual Del Operario página 11

Ocultar thumbs Ver también para 020229:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Use the Adjustable Nozzle
You should now know how to START and STOP your
pressure washer.The information in this section will tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
1.
Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure 11). Slide nozzle backward
to achieve high pressure.
Figure 11 — Adjusting Nozzle for Pressure
Backward = High
Pressure Mode
2.
Point nozzle down towards a firm surface and press
trigger to test pattern (Figure 12).
Figure 12 — Testing the Spray Pattern
2450 PSI Pressure Washer
Forward = Low Pressure and
Detergent Mode
3.
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 13).
Figure 13 — Adjusting the Nozzle for Spray Pattern
Counterclockwise = Fan
Spray Pattern
4.
For most effective cleaning, keep spray nozzle from
8 to 24 inches away from cleaning surface.
5.
If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
6.
DO NOT get closer than 6 inches when cleaning tires.
Applying Detergent with the
Adjustable Nozzle
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump.
CAUTION
You must attach all hoses before you start the engine.
• Starting the engine without all the hoses connected and
without the water turned ON will damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
To apply detergent, follow these steps:
1.
Review use of adjustable nozzles.
2.
Prepare detergent solution as required by job.
3.
Place filter end of chemical injection hose into
detergent container.
CAUTION
Keep the chemical injection tube from coming in contact
with the hot muffler.
• When inserting filter into a detergent solution bottle, route
tube so as to keep it from inadvertently contacting hot muffler.
11
Clockwise = Narrow
Spray Pattern

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido