Notes For Use; Commissioning; Use; Storage - Profi Care PC-HT 3073 Manual De Instrucciones

Notes for Use

Accessories
• If you wish to dry specific sections of your hair only, at-
tach the styling nozzle. That will concentrate the air flow.
• In order to remove the nozzle, let the appliance cool
down. You can speed up that process by pressing the
button for approx. ½ minute during operation. You may
then simply remove the nozzle.
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for
a silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.

Commissioning

• Flip the handle open.
• Unwind the mains cable completely.
Electrical Connection
1. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a properly installed earthed
socket.
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
26
PC-HT3073_IM
Slide the switch on the handle to the desired heat / blower
setting:
Position = Off
Position = Moderate airflow and low temperature
Position = Strong airflow and medium temperature
Position = Strong air flow and high temperature
COOL SHOT (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the de-
sired interval length. When the button is released it returned
automatically to the initial position.
Switch-Off
Set the switch to after use. Disconnect the mains plug
from the socket.
• Leave the appliance to cool down before putting it away!
• Hang the appliance up by the suspension eye.
• The handle can be folded in order to save space during

storage.

Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
• Check the mains cable regularly for damage.

Cleaning

Air Intake Grill
Please clean the grill on the air intake side of the hair-dryer
regularly in order to avoid excessive temperatures as a
result of heat accumulation.
• Remove any dirt that is present.
• If necessary, a fine brush can be used.

Use

Storage
24.09.19