Faults - What To Do - Gaggenau AL 400 721 Manual De Instrucciones

Installing metal grease filter
1 Insert metal mesh grease filter.
2 Fold metal mesh grease filter back in and snap the
lock in.
3 Reset the saturation display by pressing the
button.
The saturation display
Close the filter cover
Grip filter cover in the middle and fold up.
The filter cover snaps in.
Clean the filter cover
For better cleaning, you can remove the filter cover.
1 Open the filter cover.
2 Grip the filter cover on the side with both hands.
3 Lift up the rear portion to the stop and pull the filter
cover forward.
The filter cover can be pulled using the bolts of the
holder.
4 Clean the filter cover
Hook in the filter cover
1 Grip the filter cover on the side with both hands.
2 Push the filter cover onto the bolts of the holder
and lift up in the front until it snaps in.
œ
œ
goes out.
Faults – what to do?
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
9
WARNING
Risk of electric shock
Improper repairs are dangerous. Only an
authorized servicer may perform repairs and may
replace damaged plug and connections. Remove
the power plug or turn off the circuit breaker or
fuse in the fuse box if the appliance is damaged
or not working. Call Customer Service.
LED lights
Defective LED lights may be replaced by the
manufacturer, his customer service or a qualified
technician (electrician) only.
9
WARNING
Risk of injury
The light emitted by LED lights is very dazzling,
and can damage the eyes (risk group 1). Do not
look directly into the switched on LED lights for
longer than 100 seconds.
Troubleshooting table
Disruption Possible cause
Appliance is not Plug is not
working plugged in
Power outage
Fuse defective
Appliance does Filter cover not
not retract. closed.
The button illu- The control unit
mination does is faulty.
not work.
The lighting The LED lights
does not work. are defective.
œ
The filter is
The button
soiled.
flashes.
Solution
Connect the appliance to
the mains
Check whether other
kitchen appliances are
working
Check in the fuse box
whether the fuse for the
appliance is in working
order
Close filter cover com-
pletely.
Call customer service.
Call Customer Support.
Clean the filter, see the
Cleaning
chapter about
and maintenance
.
13