General Precautions - Digital Projection LIGHTNING 35HD Manual De Instrucciones

English Digital Projection
LIGHTNING 35HD

General precautions

Do not open the cabinet. There are no user serviceable parts inside.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this equipment MUST be earthed.
Take care to prevent small objects such as paper or wire from falling into the projector. If this does happen,
switch off immediately, and have the objects removed by authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids on top of the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power cable.
There are no user-serviceable parts inside the lamp module. The whole module should be replaced and returned
to Digital Projection for re-furbishment.
Take care when removing the lamp module, as it is heavy (>10kg).
Take care not to touch the glass surface of the lamp module. If you do accidentally touch the glass, it should be
cleaned before use.
Do not use the lamp for more than 750 hours, as this may cause serious lamp failure, damage the lamp module
and cause extra cost on replacement.
Xenon lamps produce high intensity light. Do not look directly at the light coming from the lamp housing, or the
lens, or allow items such as magnifying lenses to be placed in the light path. This could result in serious eye
damage.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could cause a fire
Always allow the projector to cool for 5 minutes before switching off the power, moving the projector or
changing the lamp.
Never use strong detergents or solvents such as alcohol or thinners to clean the projector and lens.
4