Tabla de contenido
Publicidad
24
XL48 Microphone Pre-amplifier
7. Using The XL48
To avoid electrical shock, never operate the equipment with the covers removed.
Do not operate the equipment or any of its parts if safety guards are ineffective or
their effectiveness has been reduced.
When the unit is first powered up it will be set to 96 kHz using the internal clock
(factory default setting). When a change is made to the sample rate and clock
setting it will remain stored during a power cycle. For example, if you always
want the unit set at 48 kHz and using an external clock source, you don't have set
up these options each time the unit is power cycled.
8. Technical Specifications
© 2012 MUSIC Group IP Ltd. Technical specifications and appearances are subject
to change without notice and accuracy is not guaranteed. MIDAS and KLARK
TEKNIK are part of the MUSIC Group (music-group.com).
XL48 general specifications
Dimensions
Net weight
Shipping weight
Power requirements
Power consumption at 115 V
Power consumption at 230 V
Operating temperature range
Storage temperature range
XL48 audio electronic specifications
Maximum input level
Mic/line Mic/line + pad
Mic (gain +40 dB) Mic +
CMR at 1 kHz (typical)
pad (gain +40 dB)
Mic EIN at 60 dB gain
Mic EIN at 40 dB gain
Noise
Output noise at
minimum gain
Frequency response
20 Hz to 20 kHz
Distortion at 1 kHz
Input to output (0 dB)
Crosstalk at 1 kHz
Channel to channel
Maximum output level Line outputs (into 600 R)
Sampling frequency
Digital output
Bit rate Dynamic
range (20 Hz to 20 kHz)
midasconsoles.com
1U high (<43.6 mm) Rack 482.0 mm
(19") wide <325 mm deep
5.5 kg
6.5 kg
100 V to 240 V AC ±10%, 50 to 60 Hz
<35 W
<35 W
+5° C to +40° C
-20° C to +60° C
+11 dBu +31 dBu
>80 dB >70 dB
-128 dBu
-125 dBu
-95 dBu
+0 dB to -1 dB
0.01%
<-90 dB
+21 dBu
96 kHz, 88.2 kHz, 48 kHz
or 44.1 kHz 24-bit
only >113 dB
Publicidad
Tabla de contenido
