Power Information - Marq COLORMAX PAR56 Guia Del Usuario

Setup
Note: Items not listed under the

Power Information

Before connecting the fixture to a power outlet, make sure the power cable is not crimped or
damaged. Also, make sure the power outlet's voltage is within the range stated on this product (on
its housing or decal).
Before cleaning or replacing the fuse, disconnect Colormax PAR56 from its power source. Use a
screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the
fuse only with a new fuse with the same rating (125 V, 1 A).
Mounting/Rigging
Place the fixture on a flat, stable surface. Make sure all cables are secured and placed so that no one
will trip over them.
Optional: Follow these steps to use
a hanging bracket (not included) for
mounting the fixture to a truss.
3
1/4-turn
Introduction > Box Contents
1
Hanging Bracket (not included)
4
1/4-turn
are sold separately.
Clamp (not included)
2
5
(tighten until
secure)
5