Bosch GOP18V-28 Instrucciones De Funcionamiento Y Seguridad página 12

2610042946 10-16 GOP18V-28.qxp_GOP18V-28 10/27/16 1:30 PM Page 12
Accessory
OSL114
OSP114
OSL114JF
OSL212JF
OSM114
OSL114F
OSM114F
OSP114F
OSL312F
OSL400F
OSL034F
OSL038F
OSP212F
S A W I N G
HCS plunge
cut saw - Wooden materials
blade for - Soft plastics
wood
BIM plunge
cut saw - Hardwood
blade for - Laminated panels
hardwood
HCS plunge - Softwood
cut saw - Dowels
blade for - Tenons
wood - Furniture components
BIM plunge - Wood
cut saw - Abrasive wooden materials
blade for - Plastics
wood and - Hardened nails and screws
metal - Non-ferrous metal pipes
BIM
segment - Wooden materials
saw blade - Plastic
for wood - Non-ferrous metals
and metal
- Softwood
- Soft plastics
BIM plunge
- Drywall
cut saw
- Thin-walled aluminum and
blade for
non-ferrous metal profiles
wood and
- Thin sheet metals
metal
- Non-hardened nails and
screws
- Softwood
BIM plunge
- Hardwood
cut saw
- Veneered panels
blade for
- Plastic-laminated panels
wood and
- Non-hardened nails and
metal
screws
HCS - High Carbon Steel; BIM - Bi-Metal; CG - Carbide Grit.
Material
Separating and deep plunge cuts;
also for sawing close to edges, in
corners and hard to reach areas;
example: narrow plunge cut in
solid wood for installing a
ventilation grid.
Plunge cuts in laminated panels
or hardwood; example: installing
skylights.
Fast, deep separating and
plunge cuts; also for sawing
close to edges in corners and
hard to reach areas; example:
deep plunge cut in softwood for
installing a ventilation grid.
Fast, deep plunge cuts in wood,
abrasive wooden materials and
plastics; example: fast cutting of
non-ferrous metal pipes and
profiles with smaller
dimensions, easy cutting of
non-hardened nails, screws and
steel profiles with smaller
dimensions.
Separating and plunge cuts; also
for sawing close to edges, in
corners and hard to reach areas;
example: shortening already
installed bottom rails or door
hinges, plunge cuts for adjusting
floor panels.
Smaller separating and plunge
cuts; example: cutting an opening
for sockets, flush cutting a copper
pipe, plunge cuts in drywall.
Filigree adjustment work in wood;
example: sawing openings for
locks and fittings.
Plunge cuts in laminated panels
or hardwood; example:
shortening door frames, cutting
openings for a shelf.
-12-
Application