Cleaning And Care; Troubleshooting (For Service Personnel) - Klarstein ZAP DRY Manual De Instrucciones

EN
16

CLEANING AND CARE

Good maintenance will ensure normal operation of the device and extend its
operational life.
1. Rub down the dryer with a soft cloth.
2. If the dryer is particularly dirty, use a damp cloth with a mild soap solution to wipe
down the dryer. Never pour water, thinner, kerosene or volatile oils directly onto
the device.
3. Periodic maintenance of the laundry drum may extend the life of the appliance.
4. To avoid hazards, do not use heaters near the unit.

TROUBLESHOOTING (FOR SERVICE PERSONNEL)

1. The device features automatic troubleshooting.
Error display
E1
E2
2. If the unit does not heat up or only heats up slowly: replace the heating device and
check whether the wind control is blocked.
3. The device cannot be operated. The buttons do not respond. Check if the power
plug has been inserted. If not, insert it and try again.
Tips
1. Remove the foam before use. Use of the device on carpets is prohibited.
2. Never block the air outlet between the top cover and the frame during operation.
3. Hang the clothes in the unit as far as possible.
4. The hanging of dripping clothes is prohibited.
Cause
Temperature sensor
defective
Abnormal temperature -
Check if the air inlets and
outlets are blocked and if
there are drops of water
in the laundry drum.
Solution
Replace the temperature
sensor
Clean the air inlets and
outlets. If necessary,
replace the fan. Remove
water. Turn off and
restart the device.