HQ-Power VDPLPS36BP Manual Del Usuario página 5

You can use the same starting address for a whole group of devices or enter an individual one for every
•
device.
• When all devices have the same address, all the units will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you
set different addresses, each device will "listen" to a separate channel number. Changing the settings of
one channel will only affect the device in question.
In the case of the 4-channel VDPLPS36BP, you will have to set the start address of the first unit to 1, the
•
second unit to 5 (1 + 4), the third to 9 (5 + 4), and so on.
7. Operation
7.1 DMX channels
Channel Function
Channel 1 Dimmer / Strobe
Channel 2 Red
Channel 3 Green
Channel 4 Blue
7.2 Stand alone functions (dip switches)
DMX
dip switch 10 on
dip switch 10 off
Effects
dip switch 9 on
dip switch 9 + 1 on
dip switch 9 + 1 + 2 on
Fixed colours
dip switch1 on
dip switch 2 on
dip switch 3 on
dip switch 4 on
dip switch 5 on
dip switch 6 on
dip switch 7 on
dip switch 8 on
Combining these settings give mix colours. Example: 3 + 6 + 8 = white.
8. Cleaning and Maintenance
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
•
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections ...
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain the
•
device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts, apart from the lamp and the fuse (see "Installation").
Contact your dealer for spare parts if necessary.
•
V. 05 – 06/09/2013
VDPLPS36BP
DMX on
internal programs
rainbow chase
3 – 8: speed adjust
strobe slow
3 – 8: speed adjust
red – blue chase
3 – 8: speed
red dim 1
red dim 2
red full
green dim 1
green dim 2
green full
blue dim 2
blue full
5 ©Velleman nv