Important; Tool Use And Care; Specific Safety Rules For Cordless Impact Wrenches - Urrea LI920A Manual De Usuario Y Garantía

IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
12
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
CORDLESS IMPACT WRENCH
• Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator.
• Use clamps or other practical way to support
and secure the workpiece to a stable platform.
Holding the work by hand or against your body
is unstable and may lead to loss of control.
• Do not drill, fasten or break into existing
walls or other blind areas where electrical wir-
ing may exist. If this situation is unavoidable,
disconnect all fuses or circuit breakers supply-
ing the work site.
• Always wear safety goggles or eye protection
when using this tool.
• Bits, sockets, and tools get hot during opera-
tion. Wear gloves when touching them.
• Wear ear protectors when using the tool for
extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
• Use thick, cushioned gloves and limit the ex-
posure time by taking frequent rest periods.
Vibration caused by hammer-drill or Impact
wrench action may be harmful to your hands
and arms.
• Secure the material being fastened. Never
hold it in your hand or across your legs. Unsta-
ble support can cause loss of control and injury.
• Avoid accidental starting. Be sure the for-
ward/reverse switch is in the OFF position
before inserting a battery pack. Carrying ap-
pliances with your finger on the switch or in-
serting the battery pack into an appliance with
the switch on invites accidents.
• Remove battery pack before changing acces-
sories. Accidental starting may occur because
battery appliances with a battery inserted are
in the operative condition.
• Be prepared for a reaction torque when
"seating" or removing a fastener. The tool
housing may tend to twist in the opposite di-