wilux WINDY Manual De Instrucciones página 10

Istruzioni Windy 11-02-2004 10:49 Pagina 10
Fill the bathtub with warm water (ideal temperature 37/38°C) approximately 10 cm. over
the lateral jets. Activate the pump by pressing the key @@. The pump will only be activated
if the system is under tension (Led
@@ again.
If you press the key
will be illuminated, indicating that the function is active. To regulate the quantity of air
towards the jets you use the key
blower press again key @@.
If the bathtub is empty the blower can still be activated to dry the tubes of the air system.
Press the key
empty the nozzles completely. To dry the tubes you have to wait 15 minutes after emptying
the bathtub. Press the key
LED AND FUNCTIONS
on/off water pump
activation/deactivation blower
air regulation blower
increase air towards the jets
air regulation blower
diminish air towards the jets
@@ also the blower will be activated. At the same time the central led
@@ and leave the blower in function for approximately 1 minute in order to
@@ again to deactivate the blower.
VISUAL PRESENTATION SYSTEM
@@ will be illuminated). To deactivate the pump press
@@ for more air and key @@
10
if illuminated indicates
presence of tension
if illuminated indicates
blower active
for less air. To deactivate the