A
Canopy
B
Open/Folding Button
C
Handle bar
D
Backrest recline strap
E
Parking brake
F
Back wheel
1. Unfolding the stroller:
(1) use one thumb to press the switch on the button, of the handle from left to right while (2) the
other fingers rotate the central section of the handle forward (3) Gently pull the handle upwards
to open up the stroller.
2. Adjusting the canopy:
Pull the canopy forward to expand the canopy
3. Fitting the bumper bar:
To fit the bumper bar: (1) Attach the bumper bar into bumper bar attachment point
(2) push down firmly until it clicks into place. Ensure the bumper bar is engaged before use by
pulling it upward.
4. Removing the bumper bar:
Locate the button underneath the seat unit by pulling the leg rest to the uppest position (1) Press
the button of bumper bar and (2) lift the bumper bar upward from the stroller.
5. Using the safety harness:
Fit together the two connectors on the harness strap and push firmly into the buckle housing
until they click together. Important: Ensure they are fully engaged before use. To release the
connectors depress the center button on the buckle housing, the two connectors will release from
the main housing. Warning: To avoid serious injury always use a 5point safety harness. Important:
Always ensure the parking brake is engaged when placing and removing children from the vehicle.
G
Shopping basket
H
Front wheel
I
Front wheel release device
J
Footrest
K
Bumper bar release button
L
Bumper bar
EN