Set-Up - Noxon VR360 Manual De Usuario

Set up
English
Setting the line:
1. Tie the rope at one end making sure the anchor point can withstand the tension of the line.
2. At the other end use a turnbuckle, having a strong anchor point. Make a loop to the rope and use
the tensioner to join the anchor point and the loop made.
3. Mount the VR360 Minicablecam on the line resting on the lower part of the 2 end pulleys and pass
it through the upper part of the central pulley.
Camera mounting:
1. Screw the camera into the ¼ screw in the anchor plate.
2. Attach the plate to the base of the Portable Wirecam.
Turning on the VR360 Minicablecam:
1. Connect the battery to the power input of the electronic box.
2. Press and hold the power button until you hear two short beeps.
Turning on the wireless controller:
1. Press and hold the center button until the screen turns on.
2. Rotate the center knob in any direction to complete the line on the screen.
Synchronization:
1. The synchronization between the VR360 Minicablecam and the wireless controller is automatic.
2. Once turned on, the appearance of the EXT battery level indicator bar will mean that the connec-
tion between the controller and the wirecam has already been established.
NOTE: If the EXT battery indicator (1) we see a rectangle with a diagonal line inside it, it means that
there is no connection. Check that the remote control and the device are on the same channel throu-
gh the settings screen on the remote control.
Pág. 12