CYCLE SETTINGS AND OPTIONS
Cycle Selector Icons
To change the settings during the cycle, touch
Start/Pause to pause the cycle, then touch the
relevant cycle selector icon to change settings.
•
Touch the Start/Pause button to activate
the control panel.
The cycle selected and the Start/Pause button
start blinking.
Selecting a Cycle
1 Touch Power
Control Lock
*
2 Touch the cycle selector icon repeatedly
until the desired cycle and setting is
illuminated.
3 Touch Start/Pause.
Changing Settings During a Cycle
1 Touch Start/Pause to pause the cycle.
2 Touch the relevant cycle selector icon to
change settings.
• During the Refresh and Sanitary cycles, the
machine will make a boiling and hissing sound
as water is boiled to make steam and steam
is sprayed on clothes. This is normal.
• The moving hanger will move even when only
the shelf is being used.
• Cycle times may vary depending on the usage
environment, including water temperature.
• Cycle time for the Gentle Dry cycle may be
longer for wet clothes that are not spin dried.
• Very thick clothing may not be as uniformly
dry at the end of the Gentle Dry cycle.
• If the Sanitary cycle is changed to a Refresh
or Gentle Dry cycle during operation, the
sanitize process is not performed.
CAUTION
•
Do not open the door during operation.
There is a risk of burns or injury from
escaping hot air or steam.
•
Do not allow steam or hot air to escape
the cabinet during operation. Opening
the door during operation also affects
performance, lengthens drying time, and
results in water condensing and collecting on
the floor.
•
Do not put very wet items in the Styler to
dry. Shake off or wring out excess water
before putting items in the cabinet to
dry. If a large amount of water pools in the
cabinet, drying performance may suffer or
the product may be damaged.
•
Remove or store the shelf when hanging
longer items so items won't get wrinkled.
•
Fasten buttons and zippers on hanging
clothes to prevent them from falling off
hangers during operation. Fasten the neck
area with cotton string if there is no button
or zipper.
Selecting the Downloaded Cycle
1 Touch Power
2 Touch the Special Care cycle selector icon
to select the Downloaded cycle.
3 Touch Start/Pause.
• Download and use the LG Smart Styler app
on a smart phone to confirm the current
downloaded cycle or to download another
cycle.
• Only one Downloaded Cycle can be saved and
changed at a time. See Downloading Styler
Cycles, page 36.
OPERATION
33