d. Make sure that the filters (2 and 3) are correctly positioned in the appliance and that the
hooks (10) are positioned vertically.
3
2a
e. Place the front panel (1) on the
appliance body (6) by hooking the
upper hooks first, then insert the
lower pivots (1a) in their respective
slots (6b).
f. Use the specific handle (8) in order
to move the appliance.
Do not use the appliance without filters (2 and 3)
or if these latter are dirty or worn.
g. Insert the plug in the power socket; a beep warns that the appliance is ready for functioning.
Make sure that the supply voltage corresponds to
what is indicated on the appliance data plate.
THE MANUFACTURER TAKES NO RESPONSIBILITY FOR
DAMAGES TO PEOPLE OR PROPERTY CAUSED BY A FAILURE
TO FOLLOW THE RULES CONTAINED IN THIS MANUAL.
EN - 7
OK
8
10
3
2b
1
6
NO
6b
1a