VMB TE-071 Manual De Instrucciones página 13

Operating instructions
O R IG INAL
PRO LIFTS S.L.
3.12 - Before using the lift, check the state
of the cable. The cable should not contain
broken threads or show any signs of
crushed/flattened areas. NEVER use faulty
cables, always change them if there is any
doubt. Only use steel cables reference:
DIN 3060. Quality: 180KG/mm and torsion
resistant.
3.13 - NEVER take apart the crank of the
winch when the lift is carrying a load or
extended.
-25
3.14 - The minimum load to avoid problems
regarding the breaking mechanism is 25KG.
Without this load the brake will not work.
3.15 - Do not grease or lubricate the winch's
breaking mechanism. The brake disks have
been greased with a special heat and
pressure resistant solution. Other products
should not be used to avoid negative effects
regarding the braking mechanism.
3.16 - All sections must be lowered during
transportation.
3.17 - Only original replacement parts should
be used.
v10.12 - Depósito legal y Copyright 2010. Todos los derechos reservados.
ENGLISH