MAGLOGIX XBAM-L-1000 1000lb Manual De Instrucciones página 3

Safety instructions
Danger can occur when transporting loads by lifting devices due to improper use and/or poor maintenance, which
may cause severe accidents and serious injury or even death. Please read and follow the operation and safety
information contained in this operating manual very carefully. If you have any questions, contact the manufacturer.
Always...

activate the lifting magnet completely

activate the lifting magnet on metallic, ferromagnetic materials

use the entire magnetic surface for lifting

lift on plane surfaces

check the magnetic holding force by lifting the load slightly a few inches

clean the magnetic surface and keep it clear of dirt, chips and welding spatter

set the lifting magnet down gently to prevent damage to the magnetic surface

check the surrounding hazard area before pivoting the load

respect the stated maximum load before pivoting the load

inspect the magnetic surface and the entire lifting magnet for damage

use suitable lifting devices, chains, hooks, slings, etc...

follow the instructions in this operating manual

instruct new operators in the safe use of lifting magnets

respect local and country-specific guidelines

keep and use in a dry environment

read and follow guidelines specified in ASTM B30-20 and / or BTH-1
Never...

lift round or arched objects

exceed the stated maximum load

lift loads over people

lift more than one work piece at a time

switch the lifting magnet off before setting down the load safely

allow the load to sway or bring to a sharp and immediate stop

lift loads exceeding the recommended dimensions

lift loads with cavities, cut-out openings or drilled holes

lift unbalanced loads

modify the lifting magnet or remove operating labels

use the lifting magnet if damaged or missing parts

strain the underside of the magnet through heavy impact or blows

position yourself beneath the lifted load

lift loads while people are within the hazard area

leave the lifted load unattended

use the lifting magnet without having been properly instructed

use if you have not read and understood these operating instructions completely

use the lifting magnet to support, lift or transport persons

operate the lifting magnet in temperatures higher than 60°C (140°F)

expose to corrosive substances
People using pacemakers or other medical devices should not use this lifting magnet until
they have consulted with their physician.
3