EN
Thanks for purchasing this product. For your own safety, please, read this user manual carefully before you initially start-up.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to be qualified and to follow the instructions of
this manual.
-
CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching
the wire.
-
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user, to follow the safety instructions and warning notes written in this user manual.
-
Important: Damages caused by the disregard of this user manual, are not subject to warranty. The dealer will not accept liability
for any resulting defects or problems.
-
Keep away from heaters and other heating sources!
-
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
-
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to
time.
-
If the external flexible cable or cord of this device is damaged, it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person in order to avoid a hazard.
-
Never let the power-cord come into contact with other cables. Handle the power-cord and all connections with the mains with
particular caution.
-
Make sure that the available voltage is not higher than stated in this manual.
-
Always disconnect from the mains when the device is or in use or before cleaning it. Only handle the power-cord by the plug.
Never pull out the plug out the plug by tugging the power-cord.
-
HEALTH HAZARD. Never look directly into the light source, as sensitive persons may suffer and epileptic shock.
-
Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons, are
not subject to warranty.
-
Keep away children and amateurs from the device.
-
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by authorized
dealers.
Main Features:
1) Current Limiting, and will be decreasing 10% of mA when the LED Fixture's Working Temperature reaches 75°C;
2) LED Fixture's Working Temperature will be displa yed (selectable on/off) on the LED Display Menu after 1 minute;
3) Five Operating Modes: DMX512, Manual, Master/Sla
4) Selectable, on/off, between one of the Preset Pr
being detected by the LED fixture;
5) High Power LED Chips;
6) Switching Power Supply Unit.
POWER SUPPLY
Connections
User Manual/Manual de Uso
SUPERPARLED 355 IP
ve, Audio Detected, 6 Preset Programs;
ogram Mode and DMX512 Standby Mode when there is No DMX Input Signal
LED PROJECTOR
DMX IN/OUT
Connections
MENU
UP
DOWN
ENTER
Pag. 1