Metra 95-8722B Instrucciones De Instalación página 2

Mercedes-Benz C-Class
1. Unclip but do not remove shifter
trim (small piece with gear
indicators and chrome trim).
2. Unclip the center console trim
panel and twist around the smaller
shifter trim to remove. (Figure A)
3. Remove the ashtray insert by
releasing (2) plastic clips on the
bottom lip of the ashtray assembly.
(Figure B)
4. Inside each vent, using a small
flat screwdriver push the lower
tab inward toward the center of
the vent and then rotate each vent
up to expose (1) Torx head screw.
Loosen the Torx screws (It is not
necessary to remove the screws.)
Push the upper clip inward and
rotate the vent downward to
expose (1) spring clip in the top of
the vent assembly. (Figure C)
Dash Disassembly
(Figure A)
(Figure B)
95-8722B
5. Unclip the (2) metal clips at the
bottom edge of the climate control/
radio trim panel and remove
trim panel.
(Figure C)
2
6. Push down on the spring clips to
remove the vent assembly. Remove
(4) Phillips screws securing factory
radio then unplug and remove
the radio.
Continue to kit assembly on back