Adjusting the Sound Characteristics
1.
AUDIO
Press the
to select the desired adjustment mode
as follows;
BASS 0
TREBLE 0
LOUD OFF (LOUDNESS)
X-BASS 0
L0 R0 (BALANCE)
R0 F0 (FADER)
LE Lo (LEVEL METER)
2.
Rotate the VOL dial to adjust the selected item.
Use the following tables as a guide for adjusting the set-
tings in each mode.
Adjust within 5 seconds after selecting the item. After 5
seconds, the unit returns to previous indication.
Adjustment Range
BASS
BASS –5
TREBLE
TREBLE –5
LOUDNESS
LOUD OFF
X-BASS
X-BASS 0
BALANCE
L9 R0(Full left)
FADER
R9 F0(Full rear)
LEVEL METER
OFF
Lo (Normal)
Tip
Settings for BASS, TREBLE, LOUDNESS and XBASS can
be made to each of the following modes independently:
FM, AM, CD.
E-4
Enhancing the bass sound
For extended bass centered @ 72Hz, Blaupunkt's X-BASS
function can be set for either each band and CD mode.
You can select :
• X-BASS 1 : Enhanced BASS level (low).
• X-BASS 2 : Enhanced BASS level (Middle).
• X-BASS 3 : Enhanced BASS level (High).
• X-BASS 4 : Enhanced BASS level (Very high).
• X-BASS 0 : No BASS enhanced.
AUDIO
Press the
dow. Each time you rotate the VOL dial, the current mode
appears on the display window and the mode change as fol-
lows:
Note
Reduce XBASS level if your combination of speakers and add-
on amplifiers sound distorted at the preferred sound level.
BASS 5
Level Meter Sensitivity selection
TREBLE 5
The sensitivity of the level meter display can be switched.
LOUD ON
You can select :
• OFF (No indication)
X-BASS 4
• Low
: Normal (Low) sensitivity.
L0 R9(Full right)
• High
: High sensitivity.
R0 F9(Full front)
1.
Press the
Hi (High)
window.
2.
Rotate the VOL dial to select the desired meter sensitiv-
ity.
to display the " X-BASS " on the display win-
X-BASS 0 (No display)
X-BASS 1
X-BASS 2
X-BASS 3
X-BASS 4
AUDIO
to display the " LE Lo " on the display
:
OFF
:
Lo
:
Hi