Makita XCV10 Manual De Instrucciones página 13

1. Shoulder the vacuum cleaner body and fas-
ten lower and upper belts. Adjust the tightness as
necessary.
2. Press button to start vacuuming. To change
the suction power, press
cleaner is running. The suction power switches between
normal (1) and higher (2) suction power. Press
ton to stop.
During the operation, hook the switch box on the lower
belt or the D-ring.
button while the vacuum
but-
3. Replace the filter bag when it becomes full. Open
the lid and take out the filter bag. Pull the strip on the
side of the opening to shut the filter bag and dispose of
the filter bag in whole.
► 1. Strip
When using a dust bag, take out the dust bag and dis-
pose of the dust by releasing the latch.
► 1. Latch
NOTICE:
Periodically check the filter bag if it is
full. Continuous use with the filter bag full results in
reduced suction power.
NOTICE:
Do not use an used filter bag. The filter
bag is designed for single use. Using filter bag repeat-
edly may cause clogging of the filter and results in
damage to the cleaner. If you want to use the bag
repeatedly, use a dust bag.
13 ENGLISH
1
1