Kohler K-702205 Manual De Instrucciones página 13

8. Install the Towel Bar
NOTE: Installation of the towel bar is easiest with two people.
Place a washer onto the screw.
Insert the screw through the mounting hole in the panel.
Slide a washer over the screw.
IMPORTANT! Do not overtighten the screws. The glass may break.
Have a second person hold the other end of the towel bar over the second hole.
Position the towel bar over the screw and tighten the screw by inserting a 5/64" hex wrench into
the hole in the screw head and turning. Do not overtighten or the glass may break.
Repeat with the other side of the towel bar.
Kohler Co.
Washer
Washer
1/4" x 20 Screw
Insert a 5/64" Hex wrench into hole
in screw head and turn clockwise to
secure tower bar.
13
1/4" x 20 Screw
Towel Bar
1054857-2-A