Siemens LC8L950 Instrucciones De Uso página 24

Replacing the light bulbs
Fluorescent light bulbs:
1. Switch the extractor hood off and isolate
it by removing the mains plug or by
switching off the fuse.
When operating, the fluorescent light
bulbs get very hot. Even after a while, there
is still a risk of being burnt.
2. Remove the grease filter (see
disassembling and assembling the metal
grease filter.
3. Lift the glass plate.
To do this, insert finger through the
opening.
4. Remove the glass plate.
24
5. Exchange the fluorescent light bulbs
(commercially available light bulbs
FM 730, 11 Watt).
Risk of breakage!
6. Replace the glass plate.
7. Carefully discharge the glass plate.
Risk of injury!
Insert the 3 fluorescent light bulbs and
re-attach the glass plate (see Replacing
the light bulbs).