Siemens LC8L950 Instrucciones De Uso página 30

Installation
07. Remove the extractor hood. Drill the
4 lower 8 mm ø fixing holes and press
in the wall plugs flush with the wall.
min. 550
recommendation 650
08. Attach the extractor hood and screw
into position with the remaining
4 screws.
09. Stick protective film over the holes of
the 2 lower mounting bolts in the
protective grid.
10. Connect up the air outlet pipe.
11. Insert the 3 fluorescent light bulbs and
re-attach the glass plate (see Replacing
the light bulbs).
12. Connect extractor hood to the power
supply.
30
13. Remove the protective film from the
two flue ducts.
Take care not to damage the
stainless steel surfaces which are
susceptible to scratches etc.
Warning: The interior walls of the flue
panelling can have sharp edges – Risk of
injury –.
We recommend that you wear gloves when
installing.
14. Push both sections of the flue panelling
together (slots in the upper section
must be pointing downwards) and
insert into the opening in the extractor
hood.
Protect the cover panels from
scratches, for example by laying the
template used for marking the wall over
the top edge of the lower section.
3.
1.
15. Slide out the upper section and attach
it to the mounting brackets at the sides
with two screws.
16. Insert the grease filter (refer to
Operating Instructions).
2.